ZGGB40-385(1+1)
General
The ZGGB40-385(1+1) Modular Power Supply SPD consists of three MOV power supply modules, one GDT power module, and a base. It provides second-level protection for L-N and N-PE and its operating status can be monitored remotely. It applies in low voltage AC power distribution systems, and is connected between the AC power supply and the equipment in parallel. It protects the equipment from impulse surge and transient overvoltage caused by the outside environment (such as lightning and EMI) or by the system (such as switching effects of the system, startup or shutoff of the inductance and capacitance loads).
Features
1.Anti-plug and mutual-plug protection
2.No backup fuse needed
3.High discharge capacity, low residual voltage
4.Overheating and over-current protection
5.Failure indication and centralized remote signalling alarm dry contacts
Standard Complied
IEC 61643-11:2011 Low-voltage surge protective devices – Part 11: Surge protective devices connected to low-voltage power systems – Requirements and test methods
Technical Data
Operating Environment
| Temperature range |
–40°C to 80°C |
| Relative humidity range |
≤ 95% (25°C) |
| Altitude range |
–500 m to 4000 m |
Technical Parameters
| Model |
ZGGB40-385(1+1) |
| SPD according to IEC 61643-1 /11 |
Class II |
| SPD according to EN 61643-11 |
Type 2 |
| Modes of protection |
L-N |
N-PE |
| Maximum continuous operating voltage Uc |
385 V AC |
255 V AC |
| Working frequency |
50/60 Hz |
| Nominal discharge current In (8/20 μs) |
20 kA |
| Maximum discharge current Imax (8/20 μs) |
40 kA |
| voltage protection level Up |
2.0 kV |
1.5 kV |
| Follow current interrupting rating Ifi |
/ |
100 Arms |
| Access mode |
In parallel |
| Response time TA |
≤25 ns |
| Cross-sectional area of the copper wire connected by the terminal |
Multi-core wire: 1.5 mm2-25 mm2, single-core wire: 1.5-35 mm2 |
| Cross-sectional area of the copper wire connected by the remote signalling interface |
0.5-1.5 mm2 |
| Sensitivity of the remote signaling alarming contact |
AC: 125 V/0.5 A, DC: 30 V/0.1 A |
| Torque: Terminal/Remote signalling interface |
2.5/0.25 Nm |
| Degree of protection of enclosure (IP rating) |
IP20 |
| Application system |
TT, TN |
| Installation mode |
35-mm guide rail |
| Flammability |
UL94 V-0 |
Circuit Diagram
Configuration
Dimensions (H x W x D): 90 mm x 36 mm x 76 mm (not including remote signalling interface)
